Austro Engine AE330 - Disassembly of Brush Holder

Maintenance Manual
E4.08.04
Issue date: 14-Dec-2015
Page: 24-8
Revision no: 26
Fig. 24 - 7 Contact ring
24-30-35 Disassembly of Brush Holder
To check the length of carbon brushes further disassembly of brush holder assembly E4A-91-300-000
is necessary.
Push upper carbon brush with a small screw driver and hold them in end position below the cover rib.
Fig. 24 - 8 Brush holder
Contact ring
Cover Rib
Cover
Upper Brush
Lower Brush