10. Install the oil filter housing drain line – refer to Chapter 79-00-12.
11. Install the return line – refer to Chapter 79-00-112 Installation of the Oil Return
Line.
12. Install the belt tensioner – refer to Chapter 85-40-22.
13. Install the gearbox – refer to Chapter 85-10-12.
14. Install the engine to the aircraft – refer to the applicable Aircraft Maintenance Manual.
15. Fill in engine oil – refer to the Chapter 79-00-30.
16. Clean the working areas.
17. Perform an engine ground run according to Chapter 71-00-03.
18. After the ground run inspect fluid systems for leakage.
79-00-50 Oil Sump Gasket Exchange
For Removal and Installation refer to Chapter 79-00-40.
To Next Page
Loading...
Need help?
General
