Avaya S8500 Series - Page 122

Job Aid: Replacing the SAMP on the Avaya S8500 Series server
122 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
S8500B front panel connections
Figure 32: S8500B server, front view on page 122 shows the connections that are available on
the front panel of the S8500B server.
Figure 32: S8500B server, front view
Figure notes:
1. CD-ROM drive activity LED
2. CD eject button
3. CD-ROM drive activity LED
4. CD-ROM eject button
5. System error LED
6. System locator LED (blue); use to
visually locate the server if it is in a
location with other servers.
7. Hard disk drive activity LED
8. Power on LED
l Lit (not flashing): the server is on.
l Flashing: the server is turned off and still
connected to an AC power source.
l Off: AC power is not present, or the power
supply or the LED itself has failed.
9. Power control button
10. Reset button: press to reset the server and
run the power-on self-test (POST). You
might have to use a pen or the end of a
straightened paper clip to press the button.
11. USB connections for the Compact Flash
8
9
10
11
21 4
5
6
7
3
h2ms85bf KLC 091704