Avaya S8500 Series - Page 14

Job Aid: Replacing the Avaya S8500/B/C server
14 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
3 Remove the server from
the rack
l S8500: see Removing the S8500 server from
the rack on page 23.
l S8500B: see Removing the S8500B server
from the rack on page 44.
l S8500C: Removing the S8500C server from the
rack on page 60.
4 Remove the cover of the
server
l S8500: see Removing the cover of the S8500
server on page 23.
l S8500B: see Removing the cover of the
S8500B server on page 44.
l S8500C: Removing the cover of the S8500C
server on page 60.
5 Replace components in the
replacement server
Replace the RSA or SAMP with the original one from
the failed server:
l S8500: see Reusing the Remote Supervisor
Adapter on page 27
l S8500B: see Reusing the SAMP (S8500B) on
page 47.
l S8500C: see Reusing the SAMP (S8500C) on
page 64.
If the failed server has the optional dual NIC, you must
move it to the replacement server.
l S8500: see Reusing the optional network
interface card (S8500) on page 30.
l S8500B: see Reusing the optional network
interface card (S8500B) on page 49.
l S8500C: NIC required and installed in
replacement server.
If the hard drive in the failed server is good, you must
replace the one in the replacement server with the
original one from the failed server.
l S8500: see Reusing the S8500 server’s hard
drive on page 24.
l S8500B: see Reusing the hard drive
(S8500B) on page 45.
l S8500C: Reusing the hard drive (S8500C) on
page 61
6 Replace the cover of the
replacement server
l S8500: see Replacing the cover on the
replacement S8500 server on page 32.
l S8500B: see Replacing the cover on the
replacement S8500B server on page 51.
l S8500C: Replacing the cover on the
replacement S8500C server on page 67.
Tasks for replacing an S8500/B/C server (continued)
9
Task Description
2 of 3