Replacing the S8500 server
03-300529 Issue 4 January 2008 37
3. Select Install, make sure <OK> is highlighted, and press Enter.
The following screen is optional; it only shows if there is something on the hard drive.
4. Select <Yes> and press Enter.
The Select Release Version screen displays asking if you want to build Avaya
Communication Manager.
5. Select <OK> and press Enter to partition the hard drive and reformat the partitions.
The program begins the installation process and reports the progress.
These processes can take up to 20 minutes. When the server is ready to reboot, the
CD-ROM drive drawer opens. You can remove the CD from the drive at this time.
The reboot may take up to 3 minutes.
To Next Page
Loading...
