Azbil DCP31 - Page 197

8-19
Chapter 8. PROGRAM SETUP

Display (inserting segment)

Display (deleting segment)
•Whenyouinsertasegment,anewsegmentisautomaticallycre-
atedatthecurrentlydisplayedsegmentNo.,andallsegmentNos.
onwardareincrementedbyone.Thesettingoftheinsertedseg-
mentisasfollows:
SPsettingvalue:Samevalueasoriginalsegmentbeforethenew
segmentwasinserted
Timesettingvalue:0:10
Events,timeeventsandG.Soakarenotset,andthePIDsetNo.is
setto0.
•Ifyoutrytoinsertasegmentinaprogramalreadycontaining30
segments,pressing
ENT
willnotinsertthesegment.
•Whenyoudeleteasegment,thenextsegmentshiftsdowntothe
currentlydisplayedsegmentNo.andsubsequentsegmentNos.are
decrementedbyone.
Whenyoudeletethelastsegment,thedisplaychangesto“----”
indicatingthatnothingisset.
•Segmentscannotbeinsertedordeletedfromcurrentlyrunning
(RUN,HOLD,FAST,END)programs.
Program No. Segment No.
Pattern
tendency
EV1 to EV3 and T1 to T5 all out
I N S.
Program No. Segment No.
Pattern
tendency
EV1 to EV3 and T1 to T5 all out
D E L .