2-12
Chapter 2. NAMES & FUNCTIONS OF PARTS
Handling Precautions
• The unit of code Z06 is Kelvin (K)
• The lower limit readout of code B18 is 20°C (68°F).
The lower limit readout (°C) of codes K44, K46, T44, Z08 and Z07
is -199.9°C.
• The lower limit readout (°C) of codes F50, F46, P50 and P46 is
-199.9°C.
• The upper limit readout (°C) of codes F01 and P01.
• The PV lower limit alarm does not occur with code F50.
However, note that the PV lower limit alarm occurs at a discon-
nection when input has been downscaled when input is discon-
nected during setup.
• The number of digits past the decimal point for dc current and
dc voltage is programmable within the range 0 to 3.
• To set an input range type, enter the range number from the
three tables above.
Do not enter a number other than the range numbers listed in
the tables.
To Next Page
Loading...
