B&R Automation PC 620 - Page 103

Technical data • Entire device
Section 2
Technical data
103Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
Each individual device interface is explained in greater detail on the following pages.
Figure 34: General device interfaces example - APC620 embedded
X2X
+24 VDC supply voltage
Monitor/Panel
SDL (Smart Display Link) / DVI
Add-On UPS (optional)
CAN
COM2
COM1
4 x USB
Ethernet 10/100 MBit
POWERLINK
Status LEDs CAN / X2X
CompactFlash slot - CF1
CompactFlash slot - CF2
Power button
Reset button
CAN node number (x16, x1)
Status LEDs
Power, CF, Link
Hardware Security Key
Battery
POWERLINK
station number (x16, x1)
CAN terminating switch / LED