B&R Automation PC 620 - Drives; Add-On Hard Disk 40 GB 24 X7 ET - 5 AC600.HDDI-05

164
Technical data • Individual components
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
3.5 Drives
3.5.1 Add-on hard disk 40 GB 24x7 ET - 5AC600.HDDI-05
This hard disk is specified for 24-hour operation (24x7) and also provides an extended
temperature specification (ET). The add-on drive is referred to internally as the primary slave
drive.
Technical data
Information:
Add-on drives are only available factory-installed. Therefore, they need to be
requested when placing an order.
Figure 60: Add-on hard disk 40 GB - 5AC600.HDDI-05
Information:
The following characteristics, features, and limit values only apply to this individual
component and can deviate from those specified for the entire device. For the entire
device in which this individual component is used, refer to the data given
specifically for the entire device.
Features 5AC600.HDDI-05 < Revision D0 5AC600.HDDI-05 Revision D0
Manufacturer's product ID Seagate ST940813AM Seagate ST940817AM
Formatted capacity 40 GB
Number of heads 2
Number of sectors (user) 78,140,160
Bytes per sector 512
Table 78: Technical data - Add-on hard disk 5AC600.HDDI-05