Software • BIOS options
Section 4
Software
305Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
1.6 Security
Figure 141: X945 Security Menu
BIOS setting Meaning Setting options Effect
Supervisor
Password
Displays whether or not a supervisor
password has been set.
None -
User Password Displays whether or not a user password
has been set.
None -
Change Supervisor
Password
To enter/change a supervisor password.
A supervisor password is necessary to
edit all BIOS settings.
Enter Enter password.
Change User
Password
To enter/change a user password. A user
password allows the user to edit only
certain BIOS settings.
Enter Enter password.
Boot Sector Virus
Protection
With this option, a warning is issued when
the boot sector is accessed through a
program or virus.
Information:
With this option, only the boot sector is
protected, not the entire hard drive.
Disabled Disables this function.
Enabled Enables this function.
Table 191: X945 Security Menu setting options
Main Advanced Boot Power ExitSecurity
Security Settings
Hard Disk Security
Install or Change the
password.
Change User Password
Boot Sector Virus Protection [Disabled]
HDD Security Freeze Lock
Ask HDD Password on Every Boot[No]
Hard Disk Security User Passwords
Hard Disk Security Master Passwords
END-Key Loads CMOS Defaults [No]
Supervisor Password :Not Installed
User Password :Not Installed
Change Supervisor Password
Select Screen
Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
v02.66 (C)Copyright 1985-2009, American Megatrends, Inc.
To Next Page
Loading...
