262
Commissioning • Connection of USB peripheral devices
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
6.2 Remote connection to Automation Panel 900 via DVI
Many different peripheral USB devices can be connected to the 2 or 3 USB interfaces on the
Automation Panel 900. These can each handle a load of 500 mA. The maximum transfer rate is
USB 2.0.
Information:
Only end devices (no hubs) can be connected to the Automation Panel 900.
Figure 115: Remote connection of USB peripheral devices to the APC900 via DVI
USB 2.0
USB 2.0
USB memory media
e.g. flash drive
USB drives
e.g. CD ROM drive
USB display devices
e.g. mouse
USB input devices
e.g. keyboard
USB 1.1
USB 1.1
DVI
USB 2.0
RS232
To Next Page
Loading...
