Commissioning • Connection examples
Section 3
Commissioning
215Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
4. Connection examples
The following examples provide an overview of the configuration options for connecting
Automation Panel 800 and Automation Panel 900 and/or Automation Panel 800 devices with the
APC620. The following questions will be answered:
• How are Automation Panel 900 devices connected to the monitor / panel output of the
APC620, and what needs to be considered?
• How are Automation Panel 800 devices connected to the monitor / panel output of the
APC620, and what needs to be considered?
• How are Automation Panel 900 devices connected simultaneously to the Monitor / Panel
output on the optional SDL AP Link of the APC620 and what needs to be considered?
• What are "Display Clone" and "Extended Desktop" modes?
• How many Automation Panel 900 devices can be connected per line?
• How many Automation Panel 900 devices can be connected to an Automation Panel 800
device per line?
• How are the connected devices internally numbered?
• Are there limitations to the segment length and if so, what are they?
• What cables and link modules are needed?
• Do BIOS settings have to be changed for a specific configuration?
Information:
An RGB monitor / flat-screen can always be connected to the monitor / panel output
of the APC620 (necessary DVI to CRT adapter can be ordered under the model
number 5AC900.1000-00).
To Next Page
Loading...
