352
Software • Automation PC 620 with Windows XP Professional
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
6.1.1 FAQ
Installation on PCI SATA RAID controller - 5ACPCI.RAIC-03
The following steps are necessary for installing Windows XP Professional on the PCI SATA
RAID controller:
1) Download the RAID driver from the B&R homepage (www.br-automation.com
) and copy
the files to a diskette.
2) Connect the Media Drive (5MD900.USB2-01 or 5MD900.USB2-00) to the USB port.
3) Insert the diskette and Windows XP Professional CD in the the Media Drive and boot from
the CD.
4) Press the F6 key during setup to install a third-party SCSI or a driver.
5) Press the "s" key when asked about installing an additional drive. Insert the disk in the floppy
drive. Press "Enter" and select the driver.
6) Follow the setup instructions.
7) The setup copies the files to the Windows XP Professional folder and restarts the APC620.
To Next Page
Loading...
