B&R Automation PC 620 - Internal Numbering of Extension Units in AP800 Devices

252
Commissioning • Connection examples
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
4.11 Internal numbering of extension units in AP800 devices
An extension unit for an AP800 device is numbered like another device. The numbering of the
extension units starts from the display unit and goes in the counter-clockwise direction; all
extension unit slots that are not used are left out.
The following graphic shows numbering examples.
Figure 104: Examples - internal numbering of the extension units
Automation Panel 800
0
13
2
1
2
Automation Panel 800
0
1
2
Automation Panel 800
0