B&R Automation PC 620 - Low Level Format

260
Commissioning • Configuration of a SATA RAID array
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
5.5 Low level format
Individual hard disks can be configured using the "Low Level Format" menu. This can only be
done if a RAID set is not configured. A low level format of a hard disk takes approx. 40 minutes.
Figure 113: RAID Configuration Utility - Low level format
RAID Configuration Utility - Silicon Image Inc. Copyright (C) 2006
Create RAID set
Delete RAID set Select HDD to be formatted
Rebuild Mirrored set
Resolve Conflicts
0PM
1SM
Select Menu
ESC Previous Menu
Enter Select
Ctrl-E Exit
* First HDD
ST96023AS 55GB
ST96023AS 55GB
Low Level Format
0PM
1SM