Commissioning • Connection of USB peripheral devices
Section 3
Commissioning
263Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
6.3 Remote connection to Automation Panel 800/900 via SDL
Many different peripheral USB devices can be connected to the 2 or 3 USB interfaces on
Automation Panel 900 and/or USB connections on the Automation Panel 800 devices. These
can each handle a load of 500 mA. The maximum transfer rate is USB 1.1.
Information:
Only end devices (no hubs) can be connected to the Automation Panel 800/900.
Figure 116: Remote connection of USB peripheral devices to the APC800/900 via SDL
USB 1.1
USB 1.1
USB memory media
e.g. flash drive
USB drives
e.g. CD ROM drive
USB display devices
e.g. mouse
USB input devices
e.g. keyboard
USB 1.1
USB 1.1
SDL (USB 1.1)
To Next Page
Loading...