B&R Automation PC 620 - Interface Options; Add-On CAN Interface - 5 AC600.CANI-00

Technical data • Individual components
Section 2
Technical data
183Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
3.7 Interface options
An add-on interface (CAN or combined RS232/422/485) can be inserted.
3.7.1 Add-on CAN interface - 5AC600.CANI-00
The add-on CAN interface is equipped with a Bosch CC770 CAN controller (compatible with an
Intel 82527 CAN controller), which conforms to CAN specifications 2.0 part A/B. The CAN
controller can trigger an NMI (non-maskable interrupt).
Technical data
Information:
It is possible to add or remove an add-on interface at any time.
Caution!
Turn off power before adding or removing an add-on interface.
Figure 73: Add-on CAN interface - 5AC600.CANI-00
Features 5AC600.CANI-00
CAN interface
Controller
Amount
Connection
Bosch CC770 (compatible with Intel 82527 CAN controller)
1
9-pin DSUB, male
Terminating resistor
Default setting
Can be activated and deactivated using a sliding switch
Disabled
Table 84: Technical data - Add-on CAN interface - 5AC600.CANI-00