B&R Automation PC 620 - Technical Data

54
Technical data • Entire device
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
2.2.2 Technical data
Features APC620, 2 PCI slot variant
B&R ID code Component-dependent, see 3.1 "System units", on page 155
Boot loader / Operating system BIOS / see the chapter 4 "Software", on page 265
Processor
Cooling
Method
Component-dependent, see technical data for the CPU board
Passive via heat sink and optionally supported with an active fan kit
Main memory Max. 2 GB
Graphics
Controller Component-dependent, see technical data for the CPU board
Power failure logic
Controller
Buffer time
MTCX
1)
(see also page 544)
10 ms, dependent on the system unit revision, TBD
Real-time clock
Battery-buffered
Accuracy
Yes
Component-dependent, see technical data for the CPU board
Battery
Type
Removable
Lifespan
See also page 139
Renata 950 mAh
Yes, accessible behind the orange cover
4 years
2) 3)
Ethernet
Controller
Amount
See also page 111 or page 113
2
CAN bus Optional using add-on interface (5AC600.CANI-00)
CompactFlash
Type
Amount
See also page 133 or page 134
Type I
2 (max. 4 using optional components)
Serial interface
Amount
Type
UART
Transfer rate
Connection
See also page 104 or page 105
2
RS232, modem-capable, not electrically isolated
16550 compatible, 16 byte FIFO
Max. 115 kBaud
9-pin DSUB
USB interface
Type
Amount
Transfer rate
Connection
Current load
See also section "USB port", on page 114
USB 2.0
2
Low speed (1.5 MBit/s), full speed (12 MBit/s), to high speed (480 Mbit/s)
Type A
Max. 500 mA per connection
Reset button Yes, accessible behind the orange cover
LEDs 4 directed outwards via fiber optic lines, also see section "Status LEDs", on page 131
PCI slots
half-size
full-size
See also section "PCI slots", on page 128
2
-
Add-on UPS internal slot Yes
5PC600.SX02-00 starting with revision G0, 5PC600.SX02-01 starting with revision H0 present
See also section "Add-on UPS module slot", on page 127
Table 23: Technical data - APC620, 2 PCI slot variant