B&R Automation PC 620 - Typical Topologies; APC620 Embedded for Central Control and Visualization

36
General information • Typical topologies
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
6. Typical topologies
6.1 APC620 embedded for central control and visualization
The control program runs on the APC620 embedded. The visualization project is integrated with
Visual Components. A display unit is connected to the PC. The PC is networked via Ethernet
TCP/IP; additional Power Panel-based operator terminals can also be connected via Ethernet.
Communication to I/O systems with axes is handled via fieldbus systems (CAN bus,
POWERLINK).
Figure 1: APC620 embedded for central control and visualization
CAN
SDL
X2X
POWERLINK
Ethernet TCP/IP
ACOPOS
X20 System
Automation Panel
X20 System
Power Panel 300
Power Panel 300
Power Panel 300
APC620
X67 X67 X67 X67 X67
ACOPOS ACOPOS