B&R Automation PC 620 - Saving UPS Battery Settings; Configuring UPS System Settings

382
Software • B&R Automation Device Interface (ADI) driver - Control Center
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
10.4.5 Saving UPS battery settings
1) Open the Control Center in the Control Panel.
2) Select UPS tab.
3) Under "Battery settings", click on Save. Clicking on "Save under" opens a dialog box.
4) Enter a file name or select an existing file and click on Save.
The transfer can be aborted by clicking on Cancel in the Download dialog box.
10.4.6 Configuring UPS system settings
1) Open the Control Center in the Control Panel.
2) Select UPS tab.
3) Click on System under UPS settings. The energy options dialog box in the Control Panel is
opened.
Further information regarding the UPD system settings can be found in the Windows help.
Information:
UPS settings can only be saved using UPS firmware version 1.10 and higher.
Figure 177: ADI Control Center - UPS settings