B&R Automation PC 620 - Cables; Possible Automation Panel Units, Resolutions und Segment Lengths; BIOS Settings

218
Commissioning • Connection examples
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
4.2.3 Cables
Select one cable each from the 3 required types.
4.2.4 Possible Automation Panel units, resolutions und segment lengths
The following Automation Panel 900 units can be used. In rare cases, the segment length is
limited according to the resolution.
4.2.5 BIOS settings
No special BIOS settings are necessary for operation.
Model number Type Length
5CADVI.0018-00 DVI cable 1.8 m
5CADVI.0050-00 DVI cable 5 m
5CADVI.0100-00 DVI cable 10 m
1)
1) USB support is not possible on the Automation Panel 900 because USB is limited to 5 m.
9A0014.02 Touch screen cable - serial 1.8 m
9A0014.05 Touch screen cable - serial 5 m
9A0014.10 Touch screen cable - serial 10 m
1)
5CAUSB.0018-00 USB cable 1.8 m
5CAUSB.0050-00 USB cable 5 m
Table 118: Cables for DVI configurations
Model number Diagonal Resolution Touch screen Keys Max. segment length
5AP920.1043-01 10.4“ VGA ✓ -5m / 10m
1)
1) USB support is not possible on the Automation Panel 900 because USB is limited to 5 m.
5AP920.1214-01 12.1“ SVGA ✓ -5m / 10m
1)
5AP920.1505-01 15.0“ XGA ✓ -5m / 10m
1)
5AP920.1706-01 17.0“ SXGA ✓ -5m / 10m
1)
5AP920.1906-01 19.0“ SXGA ✓ -5m / 10m
1)
Table 119: Possible Automation Panel units, resolutions und segment lengths
Information:
The DVI transfer mode does not allow reading statistical values on Automation
Panel 900 units.