B&R Automation PC 620 - Windows Graphics Driver Settings; Windows Touch Screen Driver Settings

Commissioning • Connection examples
Section 3
Commissioning
247Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
4.9.5 Windows graphics driver settings
See chapter 4 "Software", section 6 "Automation PC 620 with Windows XP Professional", on
page 351.
If all connected Automation Panel 900 panels (line 1 + line 2) should display the same content,
then "Dual Display Clone" mode must be set in the graphics driver (see chapter 4 "Software",
section 6.2.3 "Graphics settings for Dual Display Clone", on page 357).
4.9.6 Windows touch screen driver settings
See chapter 4 "Software", section 6 "Automation PC 620 with Windows XP Professional", on
page 351.