B&R Automation PC 620 - Power Calculation with 5 PC600.SX02-01 Revision < K0

88
Technical data • Entire device
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
2.8.6 Power calculation with 5PC600.SX02-01 revision < K0
See section "Starting current", on page 117 for starting current values.
5PC600.SX02-01
0.5
USB peripheral, optional
(max. 2.5 watts per USB1 and USB2 connection)
Per CompactFlash, optional (add-on, slide-in)
External keyboard PS/2, optional
1
1
Hard disk, optional (add-on, slide-in)
CPU board, fixed device
4
16
4System unit, fixed device
Fan kit, optional
External device, optional (via BaseBoard)
10
2.5
∑ Devices 5V
∑
∑
∑
Devices 3V3
Devices +12V
Devices -12V
This system
∑ Devices total
PCI card manufacturer limit, optional
(max. 3 watts without fan kit, max. 17 watts with fan kit)
1)
PCI card manufacturer limit, optional
(max. 3 watts without fan kit, max. 17 watts with fan kit)
1)
PCI card manufacturer limit, optional
(max. 3 watts without fan kit, max. 12 watts with fan kit)
1)
PCI card manufacturer limit, optional
(max. 1.2 watts with and without fan kit)
1)
5
External device, optional (via BaseBoard)
Interface option (add-on interface), optional
Interface option (add-on interface), optional
5
0.25
Maximum possible at 5V 55
5V
Maximum possible at 3V3 23
3V3
+12V
Maximum possible at +12V 12
-12V
Maximum possible at -12V 1.2
Total power supply
Total power supply (maximum) 70
Per drive, optional (slide-in CD, DVD, CD-RW) 4
Add-on UPS module, optional 7.5
1) The total performance of one PCI card per PCI slot (= sum of power consumption for each voltage area) may not exceed the limits stated
for operation with or without a fan kit.
Information:
All entries in watts
suppliers
devices
The values for the are maximum values.
The values for the are average maximum
values, but not peak values.
Enter values in this
column
∑ Devices total 5V
N270
5PC600.X945-00