B&R Automation PC 620 - Technical Data; Flex Radius Specification

454
Accessories • Cables
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
12.4.2 Technical data
12.4.3 Flex radius specification
Features 5CASDL.0018-01 5CASDL.0050-01 5CASDL.0100-01 5CASDL.0150-01
Length
Tolerance
1.8 m
±50 mm
5 m
±80 mm
10 m
±100 mm
15 m
±120 mm
Cable diameter
Maximum 9 mm 11.5 mm
Shielding Individual cable pairs and entire cable
Connector type
Connection cycles
2x DVI-D (24+1), male
100
Wire cross section AWG 28 AWG 24
Line resistance Max. 237 Ω/km Max. 93 Ω/km
Insulation resistance Min. 10 MΩ/km
Flexibility Limited flexibility; valid for ferrite magnet - ferrite magnet (tested 100 cycles with 5x cable diameter, 20 cycles /
minute)
Halogen-free No
Flex radius
Fixed layout
See figure "Flex radius specification", on page 454
5x cable diameter (plug - ferrite magnet and ferrite magnet - ferrite magnet)
Weight Approx. 300 g Approx. 590 g Approx. 2100 g Approx. 3000 g
Table 306: Technical data - SDL cable with 45° plug 5CASDL.0xxx-01
Figure 207: Flex radius specification
Plug
Ferrite
Ferrite
Ferrite
Flex radius
Plug - Ferrit
Flex radius
Ferrite - Ferrite