B&R Automation PC 620 - Structure; Configuration APC620 Embedded

Technical data • Introduction
Section 2
Technical data
45Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
1.3 Structure / configuration APC620 embedded
The following components are absolutely essential for operation: System unit, CPU board, main
memory and heat sink.
Explanation:
1) Select a system unit.
2) Select a CPU board.
3) Select main memory and heat sink (selection 1 each).
4) Select optional components.
Figure 6: Selection guide - Basic system and optional components APC620 embedded
System unit
Configuration - APC620 embedded base system
CPU board - Main memory - Heat sink (select 1 of each component)
Select 1
CPU board
Main memory
Heat sink
5PC600.SE00-00 - SDL - 512 KB SRAM
5PC600.SE00-01 - CRT 512 KB SRAM
5PC600.SE00-02 - SDL 1 MB SRAM
0TB103.9 (screw clamp)
0TB103.91 (cage clamp)
Supply voltage connector Select 1
5AC600.UPSI-00 (Add-on UPS module)
UPS module
Configuration - optional APC620 embedded
5PC600.X945-00
5AC600.HS03-02
5MMDDR.0512-01 - 512 MB
5MMDDR.1024-01 - 1 GB
5MMDDR.2048-01 - 2 GB