44
Technical data • Introduction
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
Information:
• Depending on the system unit, a compatible fan kit can be installed in the APC620.
Required for certain system configurations and ambient temperatures (see also section
2.6 "Ambient temperatures for systems with X945 CPU board", on page 75)
• Select optional drive(s) (add-on / slide-in), based on the system unit. One add-on drive
can be installed in each system unit. Slide-in drives (1 or 2) are only available in certain
system units.
• AP Link cards create a second graphics line (possibility of extended desktop or display
clone operation) on the APC620. Only possible with system units 5PC600.SX02-00,
5PC600.SX05-00, 5PC600.SF03-00 and with an X945 CPU board.
• An add-on interface adds an optional connection possibility.
• Depending on the revision of the system unit (see graphic), an optional integrated UPS
add-on module can be installed.
• Depending on the revision of the system unit (see graphic), an optional integrated SRAM
module (battery backed) can be installed.
• The appropriate power supply plugs ensure simple connection to the power supply.
To Next Page
Loading...
