B&R Automation PC 620 - Chapter 1: General Information; Manual History

General information • Manual history
Section 1
General information
21Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
Chapter 1 • General information
1. Manual history
Information:
B&R does its best to keep the printed versions of its user's manuals as current as
possible. However, any newer versions of the User's Manual can always be
downloaded in electronic form (pdf) from the B&R homepage www.br-
automation.com.
Version Date Change
1.00 2009-10-07 - First version
1.05 2009-12-10 - Information in section 7 "Known problems / issues", on page 264 expanded.
- Section 12 "Cables", on page 446 corrected.
- 16 GB B&R CompactFlash 5CFCRD.016G-04 added.
- Section 1 "Temperature sensor locations", on page 541 corrected.
1.10 2010-08-25 - Chapter 5 "Standards and certifications", on page 387 updated.
- Section 8 "Automation PC 620 with Windows Embedded Standard 2009", on page 368 added
- Section 10 "B&R Automation Device Interface (ADI) driver - Control Center", on page 373 updated.
- B&R ID codes for system units added.
- Technical data "Remanent variables for AR (Automation Runtime) in Power Fail Mode" added for
the APC620 embedded system units and for the SRAM module 5AC600.SRAM-00.
- The section "Creating a bootable USB flash drive" removed.
- B&R USB flash drive added to the chapter 6 "Accessories" on page 441.
- Section 2 "Upgrade information", on page 330 updated.
- BIOS updated to V1.13.
Table 1: Manual history