B&R Automation PC 620 - Keyboard;Mouse Configuration

Software • BIOS options
Section 4
Software
293Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
1.4.10 Keyboard/mouse configuration
Figure 133: X945 Advanced Keyboard/Mouse Configuration
BIOS setting Meaning Setting options Effect
Boot-up Num-lock This option sets the status
of the numeric keypad when the the
system is booted.
Off Only the cursor functions of the numerical keypad
are enabled.
On Numeric keypad is enabled.
Typematic rate The key repeat function is set here. Slow Slow key repeat.
Fast Fast key repeat.
PS/2 mouse support Sets whether the PS/2 mouse port should
be activated.
Disabled Disables this function.
Enabled Enables this function.
Auto Automatic activation of the function if PS/2 mouse
port is supported.
Table 183: X945 Advanced Keyboard/Mouse Configuration setting options
Advanced
Keyboard/Mouse Configuration Select Power-on state
for Numlock.
Typematic Rate [Fast]
PS/2 Mouse Support [Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Bootup Num-Lock [On]
BIOS SETUP UTILITY
v02.66 (C)Copyright 1985-2009, American Megatrends, Inc.