B&R Automation PC 620 - Technical Data - 5 MMUSB.2048-01

Accessories • USB flash drive
Section 6
Accessories
441Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
10.4 Technical data - 5MMUSB.2048-01
Information:
The following characteristics, features and limit values only apply to this accessory
and can deviate those specified for the entire device. For the entire device where
this accessory is installed, refer to the data provided specifically for the entire
device.
Features 5MMUSB.2048-01
LED 1 LED (green), signals data transfer (send and receive)
Power supply
Current requirements
Via the USB port
max. 500 µA sleep mode, max. 120 mA read/write
Interface
Type
Transfer rate
Sequential reading
Sequential writing
Connection
USB specification 2.0 high speed device, mass storage class, USB-IF and WHQL certified
USB 1.1 and 2.0 compatible
Up to 480 MBit (high speed)
Max. 31 MB/second
Max. 30 MB/second
To each USB type A interface
MTBF > 3,000,000 hours
Data retention > 10 years
Maintenance None
Operating system support Windows CE, ME, 2000, XP, Vista und Mac OS 9 or newer, Linux 2.4 or newer
Mechanical characteristics
Dimensions
Length
Width
Thickness
67.85 mm
17.97 mm
8.35 mm
Environmental characteristics
Ambient temperature
Operation
Bearings
Transport
0 to +70°C
-50 to +100°C
-50 to +100°C
Relative humidity
Operation
Bearings
Transport
85%, non-condensing
85%, non-condensing
85%, non-condensing
Vibration
Operation
Bearings
Transport
At 20 - 2000 Hz: 20 g (peak)
At 20 - 2000 Hz: 20 g (peak)
At 20 - 2000 Hz: 20 g (peak)
Shock
Operation
Bearings
Transport
max. 1500 g (peak)
max. 1500 g (peak)
max. 1500 g (peak)
Table 297: Technical data - USB flash drive 5MMUSB.2048-01