B&R Automation PC 620 - Optional Mounting Orientations

Commissioning • Installation
Section 3
Commissioning
209Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
1.3.2 Optional mounting orientations
Caution!
A fan kit must be used if the system is mounted in the following orientations. In
addition, it is important to be sure that the components used are installed in a way
that complies with the specifications of the drives being used (hard disk, etc.). See
the following pages for information regarding the specifications for mounting
orientation.
Figure 89: Mounting orientation - Optional
90°
90°
90°
90°