B&R Automation PC 620 - APC620 as Visualization Device

General information • Typical topologies
Section 1
General information
37Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
6.2 APC620 as visualization device
The visualization runs on the APC620 as a SCADA application. Two display units are connected
to the PC either locally or remotely. The control tasks interact with one or more underlying PLC
stations where I/O systems and drives are connected locally or remotely over fieldbus systems.
Additional SCADA stations can be networked via Ethernet TCP/IP.
Figure 2: APC620 as visualization device
Control system Control system
Motion control
Remote I/O systems
Visualization and operation
Motion control
Remote I/O systems
APC620
Automation Panel
X20 System
Automation Panel
PC systems PC systems PC systems
ACOPOS ACOPOS
X67X67 X67
X20 System
ACOPOS ACOPOS
X67X67 X67
Ethernet TCP/IP