Commissioning • Cable connections
Section 3
Commissioning
213Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
2. Cable connections
When making cable connections and installing cables, it is not permitted to have a flex radius
smaller than the minimum value specified.
2.1 Ethernet cable lengths for ETH1
For error free data transfer, take note of the cable length information in section "Ethernet
connection ETH1", on page 111.
Figure 93: Flex radius - Cable connection
Information:
The value specified for the minimum flex radius can be found in the technical data
for the cable that is being used.
To Next Page
Loading...
