B&R Automation PC 620 - X2 X (Only APC620 Embedded); CAN (Only APC620 Embedded)

106
Technical data • Entire device
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
2.13.3 X2X (only APC620 embedded)
Driver support
The fieldbus interface X2X is only supported together with Automation Runtime.
2.13.4 CAN (only APC620 embedded)
Driver support
The fieldbus interface CAN is only supported together with Automation Runtime.
X2X Link interface (only APC620 embedded)
The electrically isolated X2X Link is a 4-pin multipoint connector.
Pin X2X Link
1X2X
2X2X⊥
3X2X\
4 SHLD (shield)
Table 32: X2X pin assignments (only APC620 embedded)
CAN
The electrically isolated CAN bus interface is a 4-pin multipoint
connector.
Transfer rate Max. 500 kBit/s
Bus length Max. 1000 meters
Pin CAN bus
1 CAN_H (CAN High)
2CAN⊥ (CAN ground)
3 CAN_L (CAN Low)
4 SHLD (shield)
Table 33: CAN pin assignments (only APC620 embedded)
12
3
4
12
3
4