372
Software • Automation PC 620 with Windows CE
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
9.3 Requirements
The device must fulfill the following criteria to be able run the Windows CE operating system.
• At least 128 MB main memory
• At least one 128 MB CompactFlash card (size should be specified when ordered)
9.4 Installation
Windows CE is usually preinstalled at the B&R plant.
9.4.1 B&R Embedded OS Installer
The B&R Embedded OS Installer allows you to install existing B&R Windows CE images. The
four files (NK.BIN, BLDR, LOGOXRES.BMP, and LOGOQVGA.BMP) must be provided from an
already functioning B&R Windows CE installation.
The B&R Embedded OS Installer can be downloaded from the download area on the B&R
homepage (www.br-automation.com
). Further information is available in the online help for the
B&R Embedded OS Installer.
Custom keys Supported
PVI Supported
Automation Device Interface Supported
Remote Desktop Protocol for thin clients Supported
B&R VNC Viewer Supported
B&R Task Manager Supported
B&R Picture Viewer Supported
Compatible with zenOn Yes
Compatible with Wonderware No
Serial interfaces for any use 3
DirectX No
Audio ports "Line OUT" and "MIC" are supported. "Line IN" is not supported.
1) The color depth depends on the display used.
2) Use the function "Compress Windows CE Image" in the B&R Embedded OS Installer to reduce the image size.
Features Windows CE 6.0
Table 236: Windows CE 6.0 features
To Next Page
Loading...