Figure 5: Selection guide - APC620 optional components with 1, 2, 3, and 5 PCI slots
Fan kit (select 1)
5PC600.FA01-00 5PC600.FA02-00 5PC600.FA05-00
System unit
The system unit consists of
the housing and base board.
Variants:
PCI slots (1,2, 3 or 5)
Slide-in slots (0,1 or 2)
AP Link slots (0 or 1)
Configuration - Optional
Example: 2 / 1 / 1
= 2 PCI, 1 slide-in, 1 AP Link
0TB103.9 (screw clamp)
0TB103.91 (cage clamp)
A fan kit may be required for
some system configurations
AP Link insert cards
Select 1
not possible
Add-on drive
Select 1
Slide-in drives Select max. 1 Select max. 2
not possible
RAID system
Optional interface
Select 1
Supply voltage plugs
Select 1
UPS module
5PC600.FA03-00
SRAM module
Select 1
for a second
graphics line
5AC600.HDDI-05
5AC600.HDDI-06
5AC600.CFSI-00
(40 GB HDD - 24x7 operation and extended temp. range)
(80 GB HDD - 24x7 operation and extended temperature range)
(CompactFlash slot)
5AC600.FDDS-00
(USB Floppy)
Select 1
5AC600.CANI-00 (CAN)
5AC600.485I-00 (combined RS232/RS422/RS485)
5AC600.SDL0-00
Only possible when using a 5PC600.SX02-00, 5PC600.SX05-00 board.
5AC600.UPSI-00 (Add-on UPS modul)
Can only be installed starting with the following system unit revisions: 5PC600.SX01-00 Rev. H0,
5PC600.SX02 Rev. G0, 5PC600.SX02-01 Rev. H0, 5PC600.SX05-00 Rev. F0, 5PC600.SX05-01 Rev. F0
5AC600.SRAM-00 (Add-On SRAM Modul 512kB)
Can only be installed starting with the following system unit revisions: 5PC600.SX01-00 Rev. I0,
5PC600.SX02 Rev. H0, 5PC600.SX02-01 Rev. K0, 5PC600.SX05-00 Rev. H0, 5PC600.SX05-01 Rev. H0
5PC600.SX01-00 (1/0/0) 5PC600.SX02-01 (2/1/0)
5PC600.SX02-00 (2/1/1)
5PC600.SX05-01 (5/2/0)
5PC600.SX05-00 (5/2/1)
5PC600.SF03-00 (3/1/1)
5ACPCI.RAIC-03 (takes up 1 PCI slot)
5ACPCI.RAIC-04 - replacement hard diskl for 5ACPCI.RACI-03
To Next Page
Loading...
