142
Technical data • Entire device
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
2.13.32 Slide-in slot 1 drive slot
The "slide-in slot 1" drive slot exists only in APC620 system units with 2, 3 or 5 PCI slots. It is
possible to insert a number of slide-in drives into it. See table for available slide-in drives 8
"Model numbers - Drives", on page 28.
For instructions about installing and replacing a slide-in, see chapter 7 "Maintenance /
Servicing", section 3 "Slide-in drive - installation and exchange", on page 511.
The slide-in USB FDD drive (5AC600.FDDS-00) is referred to as USB.
Information:
• It is possible to add, remove, or modify the slide-in drive at any time.
• In system units with 5 PCI slots, the slide-in USB FDD (5AC600.FDDS-00)
drive must be inserted in slide-in slot 1 for mechanical reasons.
Caution!
Turn off power before adding or removing a slide-in drive.
Slide-in slot 1
Connection USB
Accessories Short description
5AC600.FDDS-00 Slide-in USB FDD
Table 71: Technical data - Slide-in slot 1
To Next Page
Loading...
