B&R Automation PC 620 - Main

268
Software • BIOS options
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
1.3 Main
Immediately after the DEL button is pressed during startup, the main BIOS setup menu appears.
Figure 118: X945 BIOS Main Menu
BIOS setting Meaning Setting options Effect
System Time This is the current system time setting.
The time is buffered by a battery (CMOS
battery) after the system has been
switched off.
Changes the
System time
Set the system time in the format
Hour:Minute:Second (hh:mm:ss).
System Date This is the current system date setting.
The time is buffered by a battery (CMOS
battery) after the system has been
switched off.
Changes the
system date
Sets the system date in the format
Month:Day:Year (mm:dd:yyyy).
BIOS ID Displays the BIOS recognition. None -
Processor Displays the processor type. None -
CPU Frequency Displays the processor frequency. None -
System Memory Displays the system memory size. None -
Product Revision Displays the CPU board HW revision. None -
Serial Number Displays the CPU board serial number. None -
BC Firmware Rev. Displays the CPU board controller
firmware revision.
None -
MAC Address
(ETH1)
Displays the MAC addresses assigned for
the ETH1 interface.
None -
Table 168: X945 Main Menu setting options
Main Advanced Boot Security Power Exit
System Time
Board Information
[12:24:36] Use [ENTER], [TAB]
System Date [Thu 07/15/2010] or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Time.
Select Screen
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
BIOS ID
: APC7R113
CPU Frequency : 1600MHZ
System Memory : 1016MB
Product Revision : Y.0
Serial Number : 316862
BC Firmware Rev. : 904
MAC Address (ETH1): 00:13:95:05:75:C0
Boot Counter : 21874
Running Time : 381h
Processor : Intel(R) Atom(TM) CPU N270
BIOS SETUP UTILITY
v02.66 (C)Copyright 1985-2009, American Megatrends, Inc.