B&R Automation PC 620 - Power Calculation with 5 PC600.SX02-01 Revision >= K0

Technical data • Entire device
Section 2
Technical data
85Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
2.8.3 Power calculation with 5PC600.SX02-01 revision >= K0
See section "Starting current", on page 117 for starting current values.
5PC600.SX02-01
0.5
USB peripheral, optional
(max. 2.5 watts per USB1 and USB2 connection)
Per CompactFlash, optional (add-on, slide-in)
External keyboard PS/2, optional
1
1
Hard disk, optional (add-on, slide-in)
CPU board, fixed device
4
16
4System unit, fixed device
Fan kit, optional
External device, optional (via BaseBoard)
10
2.5
å Devices 5V
å
å
å
Devices 3V§
Devices +12V
Devices -12V
This system
å Devices total
PCI card manufacturer limit, optional
(max. 3 watts without fan kit, max. 17 watts with fan kit)
1)
PCI card manufacturer limit, optional
(max. 3 watts without fan kit, max. 17 watts with fan kit)
1)
PCI card manufacturer limit, optional
(max. 3 watts without fan kit, max. 12 watts with fan kit)
1)
PCI card manufacturer limit, optional
(max. 1.2 watts with and without fan kit)
1)
5
External device, optional (via BaseBoard)
Interface option (add-on interface), optional
Interface option (add-on interface), optional
5
0.25
Maximum possible at 5V
70
5V
Maximum possible at 3V3 23
3V3
+12V
Maximum possible at +12V 12
-12V
Maximum possible at -12V 1.2
Total power supply
Total power supply (maximum) 70
Per drive, optional (slide-in CD, DVD, CD-RW) 4
Add-on UPS module, optional 7.5
1) The total performance of one PCI card per PCI slot (= sum of power consumption for each voltage area) may not exceed the limits stated
for operation with or without a fan kit.
å Devices total 5V
Information:
All entries in watts
suppliers
devices
The values for the are maximum values.
The values for the are average maximum
values, but not peak values.
Enter values in this
column
N270
5PC600.X945-00