B&R Automation PC 620 - Technical Data; Flex Radius Specification

Accessories • Cables
Section 6
Accessories
451Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
12.3.2 Technical data
12.3.3 Flex radius specification
Features
5CASDL.0018-
00
5CASDL.0050-
00
5CASDL.0100-
00
5CASDL.0150-
00
5CASDL.0200-
00
5CASDL.0250-
00
5CASDL.0300-
00
Length
Tolerance
1.8 m
±50 mm
5 m
±80 mm
10 m
±100 mm
15 m
±120 mm
20 m
±150 mm
25 m
±200 mm
30 m
±200 mm
Cable diameter
Typical
Maximum
8.6 ±0.2 mm
9 mm
11 ±0.2 mm
11.5 mm
Shielding Individual cable pairs and entire cable
Connector type
Connection cycles
2x DVI-D (24+1), male
100
Wire cross section AWG 28 AWG 24
Line resistance Max. 237 Ω/km Max. 93 Ω/km
Insulation resistance Min. 10 MΩ/km
Flexibility Limited flexibility; valid for ferrite magnet - ferrite magnet (tested 100 cycles with 5x cable diameter, 20 cycles /
minute)
Halogen-free No
Flex radius
Fixed layout
See figure "Flex radius specification", on page 451
5x cable diameter (plug - ferrite magnet and ferrite magnet - ferrite magnet)
Weight Approx. 300
g
Approx. 590
g
Approx. 2100
g
Approx. 3000
g
Approx. 4100
g
Approx. 5100
g
Approx. 6100
g
Table 304: Technical data - SDL cables 5CASDL.0xxx-00
Figure 204: Flex radius specification
Plug
Ferrite
Ferrite
Ferrite
Flex radius
Plug - Ferrit
Flex radius
Ferrite - Ferrite