B&R Automation PC 620 - Page 304

304
Software • BIOS options
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
1st Boot Device The boot drives can be set using this
option.
Disabled, Primary
Master, Primary Slave,
Secondary Master,
Secondary Slave,
Legacy Floppy, USB
Floppy, USB Hard disk,
USB CDROM, USB
Removable Device,
Onboard LAN, External
LAN, PCI Mass Storage,
PCI SCSI Card, Any PCI
BEV Device, Third
Master, Third Slave, PCI
RAID, Local BEV ROM
Select the desired sequence.
2nd Boot Device
3rd Boot Device
4th Boot Device
5th Boot Device
6th Boot Device
7th Boot Device
8th Boot Device
Quick Boot This function reduces the boot time by
skipping some POST procedures.
Disabled Disables this function.
Enabled Enables this function.
Quiet Boot Determines if POST message or OEM
logo (default = black background) is
displayed.
Disabled POST message display.
Enabled OEM logo display instead of POST message.
Automatic Boot List
Retry
With this option, the operating system
attempts to automatically restart following
startup failure.
Disabled Disables this function.
Enabled Enables this function.
Add-On ROM
Display Mode
Sets the display mode for the ROM
(during the booting procedure).
Force BIOS An additional BIOS part can be displayed.
Keep Current BIOS information is displayed.
Halt On Error This option sets whether the system
should pause the Power On Self Test
(POST) when it encounters an error.
Disabled The system does not pause. All errors are
ignored.
Enabled The system pauses. The system pauses every
time an error is encountered.
Hit 'DEL' Message
Display
Settings can be made here for the "Hit
'DEL' Message" display.
Information:
When quiet boot is activated the
message is not displayed.
Disabled The message is not displayed.
Enabled The message is displayed.
Interrupt 19 Capture This function can be used to incorporate
the BIOS interrupt.
Disabled Disables this function.
Enabled Enables this function.
PXE boot to LAN
(ETH1)
Enables/disables the function to boot from
LAN (ETH1).
Disabled Disables this function.
Enabled Enables this function.
Power Loss Control Determines if the system is on/off
following power loss.
Remain Off Remains off.
Turn On Powers on.
Last State Enables the previous state.
BIOS setting Meaning Setting options Effect
Table 190: X945 Boot Menu setting options (cont.)