158
Technical data • Individual components
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
Features
5PC600.SE00-00 5PC600.SE00-01 5PC600.SE00-02
CompactFlash slot 2 (CF2)
Internal organization
integrated
Primary slave
Insert for slide-in drive 1
Internal organization
-
Insert for slide-in drive 2
Internal organization
-
APC620 UPS module optional Yes
SRAM
Quantity
Remanent variables for AR
(Automation Runtime) in power
fail mode
Yes
512 kB
256 kB with CPU board 5PC600.X855-xx
192 kB with CPU board 5PC600.X945-00
Yes
1 MB
256 kB with CPU board
5PC600.X855-xx
192 kB with CPU board
5PC600.X945-00
Reset button Yes
Power button Yes
PS/2 keyboard / mouse -
Battery slot Yes
Hardware security key slot Yes (DS1425 from MAXIM/Dallas)
Fan slot -
Automation Panel link slot -
Status LEDs Power, HDD, Link1
Real-time clock (RTC)
Battery-buffered
Accuracy
Yes
See the technical data for the CPU board
MTCX
1)
Yes
Electrical characteristics
Power supply
Rated voltage
Starting current
Power consumption
24 VDC ±25%
Typically 7 A
maximum 40 A for < 300 µs
See 2.11 "Power management for the APC620 embedded system unit"
Mechanical characteristics
Housing
2)
Item
Paint
Front cover
Galvanized steel plate
Light gray (similar to Pantone 427CV), dark gray (similar to Pantone 432CV)
Colored plastic (similar to Pantone 144CV)
Outer dimensions
Width
Length
Height
68.3 mm
225.6 mm
210 mm
Weight Approx. 1.3 kg
Mounting plates (for M4 screws) 4
Drilling templates for mounting (see chapter 3 "Commissioning", section 1.2 "Drilling templates")
1) Maintenance Controller Extended, for more information, see the section "Maintenance Controller Extended (MTCX)", on page 544.
Table 74: Technical data - APC620 embedded variations (cont.)
To Next Page
Loading...
