B&R Automation PC 620 - Page 172

172
Technical data • Individual components
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
Technical data
Information:
The following characteristics, features, and limit values only apply to this individual
component and can deviate from those specified for the entire device. For the entire
device in which this individual component is used, refer to the data given
specifically for the entire device.
Features 5AC600.FDDS-00
Data capacity 720 KB / 1.25 MB / 1.44 MB (formatted)
USB transfer rate Full speed (12 Mbps)
Data transfer rate 250 kbits (720 KB) or 500 kbits (1.25 MB and 1.44 MB)
Rotation speed Up to 360 rpm
Diskette media High density (2HD) or normal density (2DD) 3.5" diskettes
MTBF 30,000 POH (Power-On Hours)
Environmental characteristics
Ambient temperature
1)
Operation
Bearings
Transport
1) Temperature data is for operation at 500 meters. Derating the max. ambient temperature - typically 1°C per 1000 meters (from 500
meters above sea level).
+4 to +50°C
-20 to +60°C
-20 to +60°C
Relative humidity
Operation
Bearings
Transport
20 to 80%, non-condensing
5 to 90%, non-condensing
5 to 90%, non-condensing
Vibration
Operation
Bearings
Transport
At max. 5 - 500 Hz and 0.3 g
At max. 10 - 100 Hz and 2 g
At max. 10 - 100 Hz and 2 g
Shock (pulse with a sine half-wave)
Operation
Bearings
Transport
At max. 5 g for 11 ms
At max. 60 g for 11 ms
At max. 60 g for 11 ms
Altitude Max. 3000 meters
Table 81: Technical data - Slide-in USB diskette drive - 5AC600.FDDS-00