B&R Automation PC 620 - Page 298

298
Software • BIOS options
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
MTCX PX32 Displays the MTCX PX32 firmware
version.
None -
MTCX FPGA Displays the MTCX FPGA firmware
version.
None -
Optimized ID Displays the DIP switch setting of the
configuration switch.
None -
Device ID Displays the hexadecimal value of the
hardware device ID.
None -
Compatibility ID Displays the version of the device within
the same B&R device code. This ID is
needed for Automation Runtime.
None -
Serial Number Displays the B&R serial number. None -
Product name Displays the B&R model number. None -
User serial ID Displays the user serial ID.
This 8 digit hex value can be freely
assigned by the user (e.g. to give the
device a unique ID) and can only be
changed with using the "B&R Control
Center" via the ADI driver.
None -
BIOS setting Meaning Setting options Effect
Table 186: X945 Advanced Baseboard/Panel Features setting options (cont.)