B&R Automation PC 620 - Page 300

300
Software • BIOS options
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
Main board monitor
Figure 138: X945 Baseboard Monitor
BIOS setting Meaning Setting options Effect
CMOS battery Displays the battery status.
n.a. - not available
Good - Battery is OK
Bad - Battery is damaged.
None -
I/O Displays the temperature in the I/O area in
degrees Celsius and Fahrenheit.
None -
Power supply Displays the temperature in the power
supply in degrees Celsius and Fahrenheit.
None
Slide-in drive 1 Displays the temperature of the slide-in
drive 1 in degrees Celsius and Fahrenheit.
None -
Slide-in drive 2 Displays the temperature of the slide-in
drive 2 in degrees Celsius and Fahrenheit.
None -
Case 1 Displays the fan speed of housing fan 1. None -
Case 2 Displays the fan speed of housing fan 2. None -
Case 3 Displays the fan speed of housing fan 3. None -
Case 4 Displays the fan speed of housing fan 4. None -
CPU Displays the rotational speed of the CPU
fan.
None -
Table 188: X945 Baseboard Monitor setting options
Advanced
Baseboard Monitor
Temperatures
CMOS Battery: Good
I/O: 37°C/98°F
: 26°C/78°F
: 31°C/87°F
: 00°C/32°F
Power Supply
Slide-In Drive 1
Slide-In Drive 2
Case 1: 1524 RPM
Case 2: 2376 RPM
Case 3: 1512 RPM
Case 4: 00 RPM
CPU: 00 RPM
Fan Speeds
Select Screen
Select Item
F1 General Help
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
v02.66 (C)Copyright 1985-2009, American Megatrends, Inc.