360
Software • Automation PC 620 with Windows XP Professional
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
• After selecting the COM ports on which Elo touch screens are connected, the system
must be rebooted.
• After restarting, each line of touch screens must be calibrated separately. This is done in
the menus "Properties 1" and "Properties 2" with the "Align" button. When one touch
screen is being calibrated, the others are automatically locked.
Figure 165: Touch screen driver - auto-detect
Figure 166: Touch screen calibration
To Next Page
Loading...
