B&R Automation PC 620 - Page 424

424
Accessories • CompactFlash cards 5CFCRD.xxxx-04
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
Support
Hardware PP300/400, PPC300, PPC700, PPC725, PPC800, APC620, APC810, APC820
Windows XP Professional - - - Yes Yes Yes
Windows XP Embedded Yes Yes Yes Yes Yes Yes
Windows Embedded Standard
2009
- Yes Yes Yes Yes Yes
Windows CE 6.0 Yes Yes Yes Yes Yes Yes
5)
Windows CE 5.0 - - - - - -
PVI Transfer Tool V3.2.3.8 (part of PVI Development Setup V2.06.00.3011) -
B&R Embedded OS Installer V3.10 -
Mechanical characteristics
Dimensions
Length
Width
Thickness
36.4 ±0.15 mm
42.8 ±0.10 mm
3.3 ±0.10 mm
Weight 10 g
Environmental characteristics
Ambient temperature
Operation
Bearings
Transport
0 to +70°C
-65 to +150°C
-65 to +150°C
Relative humidity
Operation/Storage/Transport Max. 85% at 85°C
Vibration
Operation/Storage/Transport 20 G peak, 20- 2000 Hz, 4 in each direction (JEDEC JESD22, method B103)
5.35 G RMS, 15 min per level (IEC 68-2-6)
Shock
Operation/Storage/Transport 1.5k G peak, 0.5 ms 5 times (JEDEC JESD22, method B110)
30 G, 11 ms 1 time (IEC 68-2-27)
Altitude Max. 15,000 feet (4,572 m)
1) Speed specification with 1X = 150 KB/s. All specifications refer to the Samsung Flash chips, CompactFlash cards in UDMA mode 4, 30
ns cycle time in True-IDE mode with sequential write/read test.
2) The file is written/read sequentially in True IDE mode with the DOS program Thruput.exe.
3) Endurance of B&R CF cards (linear written block size with 128 KB)
4) Depending on the average file size.
5) Not supported by B&R Embedded OS installer.
Table 289: Technical data - CompactFlash cards 5CFCRD.xxxx-04 (cont.)