B&R Automation PC 620 - Page 505

Maintenance / Servicing • Fan kit installation and replacement
Section 7
Maintenance / Servicing
505Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
• The fan connection cable must be connected to the main circuit board at the right position
(fan 1 at position 1, fan 2 at position 2).
• Place the dust filter in the fan kit cover and secure with the filter clasp.
• Replace any removed components (filter kit cover, side cover) in the reverse order.
Figure 260: APC620 3PCI slot - Fan cable connection to the main board
Figure 261: Dust filter in the fan kit cover and filter clasp
1
2
1
2
Filter clasp
Dust filter
Fan kit cover