518
Maintenance / Servicing • Installing the UPS module
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
• Install UPS module with 2 Torx screws (T10) and 1 Torx screw (T10). Use the previously
removed Torx screws and one Torx screw from the mounting materials.
• Plug in connection cable (see marked socket).
Figure 283: Install mounting bracket
Figure 284: Install UPS module
Figure 285: Plug in connection cable
Information:
When connecting the cable, make sure that the connector locking mechanism is
engaged.
Mounting bracket
+ 2 Torx screws
To Next Page
Loading...
