Maintenance / Servicing • Installing the UPS module
Section 7
Maintenance / Servicing
529Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
• Install mounting bracket on UPS module using 2 Torx screws (T10).
• Install UPS module with 2 Torx screws (T10) and 1 Torx screw (T10). Use the previously
removed Torx screws and one Torx screw from the mounting materials.
• Plug in connection cable (see marked socket).
Figure 309: Install mounting bracket
Figure 310: Install UPS module
Figure 311: Plug in connection cable
Mounting bracket
+ 2 Torx screws
To Next Page
Loading...
