Barco DP2K SLP Series Service Manual

R5906848 /04 DP2K SLP Series164
1
Image 14-11
2. Install the top cover plate of the Light Processor compartment.
3. Install the side cover plate of the Light Processor compartment.
4. Install the top cover of the projector.
5. Install the left side cover of the projector.
6. Switch on the projector.
7. Clear the security warning. See procedure page 112.
Convergence

Barco DP2K SLP Series Specifications

General

Brand	Barco
Model	DP2K SLP Series
Category	Projector
Language	English